General information
Tools
This is an overview of the special and not so special tools I use.
5-1-2007 I found a non functioning used vacuum pump at the company full of water and rust. I overhauled the pump and it works fine now. Ready for vacuum bagging | |
Hot wire cutter made of square alu tubbing , alu plates and pop rivets. Transformer is 24V -5 Amps | Sanding blocks made of 1" x 2" alu tubing. I use sanding fabric K60 stick to it with double sided adhesive tape. |
Disc sander be carefull with it. it sands very fast. | Power file! |
Sationary disc sander 300mm This is the tool to have!! | Dremel copy! very handy with the flexible axis |
Special drilbits made by welding a normal drilbit in a piece of rod. In the fuselage are some holes to dril where the use of a normal dril is impossible. | Steaming device, made of a piece of alu tubbing with a hole in the middle wich fits on the water cooker. This is for bending the wood. |
This saw I use for all exept the plywood |